Source: https://fluotask.ru/en/help/975-the-workflow-map-on-a-phone-or-tablet
Updated: 2026-11-07

# The workflow map on a phone or tablet

In Fluo, you work with the workflow map on a phone or tablet using your finger: the canvas, boards, lines, bend points and links all work without a mouse. Taps and swipes replace clicks and dragging.

Who can use it

The same plans apply on a phone as on a computer. You can change the map on Pro and Business and during their trials; on Free and Free Team the map is read-only. See “[Workflows and plans](https://fluotask.ru/en/help/596-workflows-and-plans)”.

## What’s on the screen

- Above the map are the “Route:” button and the fork button with a signpost icon (on a phone it has no caption).
- The gear button in the top left corner of the map opens the “Workflow” window. It has “Add to the route”, “Create a board”, “Create service desk”, “Create connector”, “Create group” and “Workflow help”.
- The buttons for zoom, snap to grid, labels and line animation are in the top right corner.
- The minimap in the bottom left corner can be dragged with your finger.
- The “Hidden” button with a crossed-out eye and a number appears above the map only if nodes are hidden from the route map. On a phone it shows just the icon and the number. How to hide and return nodes is described in “[Bend points, groups and map tools](https://fluotask.ru/en/help/598-bend-points-groups-and-map-tools)”.
- While the route has no links, a hint at the bottom right says “Draw a link between nodes of the map: columns, service desks or connectors. It goes into the route ‘…’.” You can close it with the cross, and it won’t show again in this browser.

The workflow map on a phone screen: the Route: button above the map, the gear button in the top left corner of the map, the zoom panel at the top right and the minimap at the bottom left are framed

## Gestures

| What to do | How |
|---|---|
| Pan the canvas | Swipe across an empty spot. A quick swipe over a board also pans the canvas instead of moving the board. |
| Zoom | Pinch or spread two fingers anywhere on the map, including over boards. |
| Move a board or another node | Press the node for about 0.2 seconds and move your finger. |
| Select a node | A long press on a node selects it, and the phone vibrates briefly. The menu doesn’t open. |
| Add a node to the selection | While the selection is on, tap another node. Tapping a selected node removes it from the selection. |
| Clear the selection | Tap an empty spot on the map. |
| Open a node menu | Long-press a node that is already selected. The menu of a board, service desk or connector has “Hide from this route map”. |
| Select a line | Tap the line. Its bend points, segment handles and label become visible. |
| Open a line menu | Long-press the line. |
| Add a bend point | Tap the selected line. If you move your finger right away, the point appears and follows it. |
| Move a point or a line segment | Drag the point or the segment handle. The canvas stays still. |
| Remove a point | Tap the point. |
| Draw a link | Drag your finger from the handle of one column to the handle of another. |
| Open the link settings | Tap the line label. Swipe the link panel to the right to close it. |

Points, handles and column handles catch a tap within a circle of about 44 pixels, so they are easy to hit even on a small screen. On a phone, the pencil next to the board name is always visible.

## How to select several nodes and move them

1. Long-press the first board. It becomes selected, and the phone vibrates briefly.
2. Tap the other boards, service desks or groups you want to select.
3. To shift the selection, press any selected node and move your finger. All selected nodes move together.
4. To move the nodes to another project, tap the “⋮” button next to the selection. The “Selected: N” menu opens. Choose “Move to another project”. The same menu has “Hide from this route map” and “Clear selection”.

Animation on a phone: a long press selects the Development board, a tap adds the Testing board to the selection, and a tap on the ⋮ button opens the Selected: 2 menu with Move to another project, Hide from this route map and Clear selection

“[Bend points, groups and map tools](https://fluotask.ru/en/help/598-bend-points-groups-and-map-tools)” explains how moving to another project works.

## How to draw a link with your finger

1. Touch the handle of a column and, without lifting your finger, move it to the handle of another column.
2. Lift your finger. The link appears, and the “Link” panel opens.

Animation on a phone: a finger is dragged from the handle of the Done column on the Design board to the handle of the Backlog column on the Development board, the link appears, and the Link panel opens

To draw a link with bends, use taps: tap the column handle, then the spots where the line should turn, and finally the handle of the other column. To drop such a line, long-press the map. More about links in “[How to connect columns of different boards](https://fluotask.ru/en/help/587-how-to-connect-columns-of-different-boards)”.

## How to tell that a change is saved

On a phone, changes in the link and fork panels don’t show the “Changed.” notification, so it doesn’t cover the fields. Instead, a mark appears in the panel header next to the cross: first “Saving…”, then “Saved”. Next to “Saved” there is an undo button (“Undo the last change”). After a few seconds the mark fades on its own.

The Link panel on a phone screen: in the header next to the cross, the Saved mark with the undo button is framed; below are the subtitle and the Link label field with the new label

If the server doesn’t accept the change, the header shows “Not saved” and a retry icon. Tap the mark to read the reason, or tap the icon to send the change again. Changes after which the panel closes, such as “Delete the link”, still show a notification.

## How to bend a line with your finger

1. Tap the line to select it.
2. Tap the selected line where you want a bend. A bend point appears there.
3. Drag the point with your finger, and the line bends.
4. To remove the point, tap it.

Animation on a phone: a tap selects the link line between the Design and Development boards, a second tap adds a bend point, the point is dragged down with a finger, and the line bends

The corners and sides of a selected group can be dragged with your finger too. More about bend points and groups in “[Bend points, groups and map tools](https://fluotask.ru/en/help/598-bend-points-groups-and-map-tools)”.

## The map inside a board

The board workflow diagram on Business works with the same gestures. Tapping a column plate opens the column window, pinching works over the plates as well, and the minimap can be dragged with your finger. If you zoom the diagram far out, the handles stop reacting to your finger: zoom in to draw a transition. See “[Board workflow: allowed transitions within the board](https://fluotask.ru/en/help/593-board-workflow-allowed-transitions-within-the-board)”.

## Related articles

- [How to connect columns of different boards](https://fluotask.ru/en/help/587-how-to-connect-columns-of-different-boards)
- [Bend points, groups and map tools](https://fluotask.ru/en/help/598-bend-points-groups-and-map-tools)
- [Board workflow: allowed transitions within the board](https://fluotask.ru/en/help/593-board-workflow-allowed-transitions-within-the-board)
- [Tasks on your phone](https://fluotask.ru/en/help/525-tasks-on-your-phone)

## Related articles

- [Workflows and plans](https://fluotask.ru/en/help/596-workflows-and-plans.md)

## Linked from

- [How to set up a connector](https://fluotask.ru/en/help/592-how-to-set-up-a-connector.md)
- [Workflows, routes and automations: all articles](https://fluotask.ru/en/help/695-workflows-routes-and-automations-all-articles.md)
- [Link rules: conditions and actions on the way](https://fluotask.ru/en/help/972-link-rules-conditions-and-actions-on-the-way.md)
- [Branches: different paths by condition](https://fluotask.ru/en/help/973-branches-different-paths-by-condition.md)
