Bend points, groups and map tools
In Fluo, you tidy up the workflow map with bend points, groups and guides, hide extra nodes from a route map, and find your way around a large map with zoom, the minimap, the grid and link labels.
How to bend a link line
- Point to a link line. Its points and segment handles become visible.
- Click the line where you want a bend. A bend point appears there.
- Drag the point, and the line bends. One line can have several points.
- To remove a point, click it again or right-click it.
You can shift each straight part of a line as a whole. Point to the line, find the pill-shaped handle on that part and drag it. The part moves parallel to itself, and the neighboring parts get longer or shorter. On a line without points, the first such move turns its corners into bend points.
How points behave:
- if two points end up in the same spot, for example with snap to grid, only one remains after you release the mouse button. A point that lands on the end of the line disappears;
- if boards stand close together and the column handles face each other at the same height, a line without points is drawn straight;
- if you select several boards and move them together, the bend points on the lines between them move along;
- the incoming line of a fork bends the same way, see “Branches: different paths by condition”.
Map tools
The zoom and view buttons sit in the panel in the top left corner of the map. Each button shows a tooltip on hover.
| Tool | What it does |
|---|---|
| “Zoom in” and “Zoom out” | Change the zoom level. The mouse wheel zooms too, and the spot under the pointer stays in place. |
| “Show the whole process” | Fits the entire map on the screen. |
| Snap to grid | Nodes and points land on the grid formed by the background dots. It’s on by default, and the browser remembers your choice. |
| Edge labels | Show the labels of all lines. When the button is off, a label shows only on the line under the pointer. |
| Line animation | The dashes run in the direction of the link. When the animation is off, lines are solid and still. |
| Minimap | Sits in the bottom right corner. Drag the frame on the minimap to jump to another part of the map. |
| Help | The “?” button at the bottom of the left panel opens the “Project workflow” window with mouse and keyboard tips. |
To pan the canvas, drag across an empty spot on the map. How to line up nodes neatly is described below in “How to align nodes”.
How to select several nodes
- Hold Shift or Ctrl and draw a box around boards, service desks, connectors, forks or groups. To add a single node to the selection, click it while holding Ctrl or Shift.
- Drag any selected node. All selected nodes move together.
- To move the nodes to another project, click the “⋮” button (“Selection actions”) at the top right corner of the selection. A menu with the “Selected: N” header opens. Choose “Move to another project”.
- In the window, choose the “Target project” and click “Move”.
The same menu has “Hide from this route map”: it removes the selected boards, service desks and connectors from the map of this route. Nodes that have links in the route stay, and the item says how many: “Nodes with links in this route stay: N”. If all selected nodes have links, the item is grayed out.
You can move nodes only to another extended project in the same space. A service desk or a connector can be moved only from its home project.
Right-click menus
| Where you click | What’s in the menu |
|---|---|
| Board | “Open the board”, “Open in a new tab”, “Edit”, “Hide from this route map”. |
| Column on a board | The same menu as the column has on the board itself: “Add a task”, “Tasks sorting”, “Linked statuses”, “Edit”, “Status automations”, “Delete”. |
| Line label | “Set up the link”. If several links leave the column, also “Make a fork”; on a fork branch, “Open the fork” and “Make it a separate link”. |
| Group | “Rename”, “Color”, “Delete”. |
| Service desk | “Open the desk”, “Open the desk home project workflow”, “Edit”, “Manage access”, “Hide from this route map”, “Delete” or “Detach the desk from this project”. |
| Connector | “Open connector home project workflow”, “Connector settings”, “Hide from this route map”, “Delete”, “Detach connector from this project”. |
| Fork | “Fork settings”, “Delete the fork”. |
Groups
A group is a colored backdrop with a name. It helps you split a large map into parts, for example “Development” and “Testing”.
- Click “Workflow groups” in the panel on the left. Or click “+” and choose “Group”.
- The group appears in an empty spot, and the map moves to it by itself. Click the name, type your own and press Enter.
- Click the colored square to the left of the name and choose a color.
- To resize the group, click it and drag a corner or the handle on a side.
The right side of the group header shows a counter, for example “3 boards, 12 tasks”. It counts only the boards that lie inside the group. The boards themselves aren’t attached to the group: if you move the group, the boards stay in place. To move everything together, select the group and the boards.
Each route has its own groups. A group created in the route of a task type isn’t visible in other routes. Each route also has its own board layout.
How to remove an extra node from a route map
The map of a route shows all boards, service desks and connectors of the project, even those that tasks of this type never pass through. You can hide such a node from the route map. The board and its tasks stay in the project, and other routes still show the node.
- Right-click a board, service desk or connector.
- Choose “Hide from this route map”. The node disappears from the map, and the notification has an “Undo” button.
- To return the node, click “Hidden” above the map, next to the “Fork” button. The button shows the number of hidden nodes.
- In the “Hidden from this route map” list, click the eye (“Return to the map”) next to the node. If two or more nodes are hidden, you can click “Return all”.
The node goes back to its old place. If that place is taken, Fluo puts it in the nearest free spot and moves the map to it. The “Hidden” button shows only while the map of this route has hidden nodes.
What you can’t hide:
- a node that has links in this route. The item is grayed out with the note “It has links in this route: remove them first”;
- a fork or a group. Delete a group you don’t need.
If a hidden node gets a link in this route, for example when you undo deleting a link, the node returns to the map by itself.
How to align nodes
When you drag a node or a point, thin red guides appear on the map. The node snaps:
- to the edges and centers of neighboring nodes and to their handles;
- to equal gaps. If the gap to a neighbor in a row or column becomes the same as the gap between two other nodes, or the node lands exactly halfway between two nodes, red segments with end ticks and a number appear on the map. Equal gaps show the same number.
Guides work with the grid off and for several selected nodes too: then the shared frame of the selection is aligned.
Plans
| Feature | Free | Free Team | Pro | Business |
|---|---|---|---|---|
| Bend points and moving line parts | no | no | yes | yes |
| Groups | no | no | yes | yes |
| Moving nodes around the map | no | no | yes | yes |
| Hide from this route map | no | no | yes | yes |
| Zoom, minimap, labels, animation, help | yes | yes | yes | yes |
You can return a hidden node on any plan. Pro and Business trials give the same as the plans themselves. See “Workflows and plans”.
Points and groups on a phone
You select a line with a tap, tap the selected line to add a point and tap a point to remove it. Groups are created in the “Workflow” window behind the gear button. See “The workflow map on a phone or tablet”.
How to find a group on a large map
Open the project search and type the group name. Fluo moves the map to the group and highlights it. See “How to search within a project”.
Related articles
On the website: Cross-team processes in Fluo: linked boards without code