Fluo

Branches: different paths by condition

Updated:

In Fluo, a fork splits a route by a condition: from one column, a task takes the branch whose condition it meets, for example based on the contract amount.

How a fork works

A fork is a diamond on the workflow map. One line enters it from a column, called the entry column. Branches leave the diamond: links to other columns. Each branch has its own condition on task fields and a number in the checking order.

  • Fluo checks the branches in order and picks the first one whose condition is met.
  • The “Otherwise” branch has no condition and always comes last. Its number on the map is gray. The task takes it when no branch above fits.
  • If there is no “Otherwise” branch and no condition is met, the task waits in the entry column.
  • A task never stays in the diamond: the diamond only picks the way. Fluo picks the branch again at every check, so if someone corrects the amount in the task, the branch can change too.

Example

Contracts go through a legal review. Large ones must be shown to management, the rest can be signed right away.

  1. A line goes from the “Sales / Legal review” column into the diamond.
  2. Branch 1, with the condition “Contract amount greater than 10,000”, leads to “Management / Awaiting approval”.
  3. Branch 2, “Otherwise”, leads to “Sales / Signing”.

The fork has “The task moves on by itself” turned on. The lawyer ticks their check, and the contract moves on by itself: a $25,000 contract goes to management, a $4,000 one goes straight to signing.

How to add a fork

  1. Open the project, click “Workflow” in the header, and in the top-left corner of the map choose the route of the task type you need with the “Route:” button.
  2. Click “Fork” next to the “Route:” button. A hint appears at the bottom of the map. The Cancel button in it turns the mode off.
  3. Drag a line from the point on the right of the entry column and release it on an empty spot on the map. You can also click: first the column's point, then a spot on the map. On a phone, tap the column's point and then a spot on the map.
  4. A diamond appears on the map, and the Fork panel opens on the right.
  5. Drag a line from the point on the right of the diamond to a column. It becomes a branch. Add the other branches the same way.
Animation: the pointer clicks Fork above the map, a hint appears at the bottom, then the pointer clicks the point on the right of the Draft column and an empty spot on the map, a diamond appears there, and the Fork panel opens on the right

If, in Fork mode, you drag a line from a column straight to another column, the diamond goes between them and the line becomes the first branch. Route links that already led from that column also become branches.

Other ways to make a fork

If two route links already lead from a column, Fluo shows a notification with a “Make a fork” button. The same item is in the menu you get by right-clicking a link label. The links from the column become branches of a new fork, and you only need to give them conditions.

If the column already has a fork, a new link from it becomes a branch right away, the last one before “Otherwise”. The “A fork branch is added.” notification has a “Make it a separate link” button in case you need a regular link.

How to set a branch condition

  1. Click the branch label on the line. The Fork branch panel opens on the right.
  2. A new branch has no condition, so it counts as an “Otherwise” branch. Turn off “Otherwise (no condition)”.
  3. Click “Condition” and choose a field, a comparison and a value, for example “Contract amount”, “greater than”, 10,000.
  4. If there are several conditions, choose “all conditions” or “any one of them” above them.
The Fork branch panel: the Otherwise (no condition) switch, turned off, is numbered 2, and the condition Contract amount, greater than, 10,000 is numbered 3

Your changes are saved a moment later, and the branch label on the map shows its condition. On a phone, a “Saved” mark with an undo button appears in the panel header, as in the link panel, see “The workflow map on a phone or tablet”. Conditions can use the project's custom fields, priority, assignee, type, deadline and tags.

A branch is a link like any other. Its panel has “Conditions of the move” and “On the move”: for example, the branch to management can assign the manager right away. See “Link rules: conditions and actions on the way”.

Branch order

The branch number is shown on the line label and in the branch panel, for example “1 of 2”. To change the order, use the “Check earlier” and “Check later” arrows in the branch panel or in the “Branches in the order they are checked” list in the fork panel. The “Otherwise” branch always stays last and can't be moved.

Order matters when a task meets several conditions at once. Put the narrower condition first. For example, put the branch for amounts over 100,000 before the branch for amounts over 10,000, or the first one will never be reached.

What is on the map

The workflow map, Contract route: the Fork: Contract amount diamond is numbered 1, the label of the entry line from the Legal review column 2, branch 1 with the contract amount condition 3, and branch 2, Otherwise, with a gray number 4
  1. The diamond with its label. Without a label of its own, it shows the fields the branches use, for example “Fork: Contract amount”.
  2. The entry line from the column. Its label says “Into the fork”, or, if the task moves on by itself, shows a paper plane and “Next”.
  3. A branch with its number in the order and its condition.
  4. The “Otherwise” branch with a gray number.

Drag the diamond with the mouse to move it. You can bend the entry line with points like any link line: click the line to add a point, drag the point to move it, click the point to remove it. See “Bend points, groups and map tools”.

The fork panel

Click the diamond or the label of the entry line to open the panel. From a branch panel, use the “Fork settings” button.

The Fork panel: The task moves on by itself switch is numbered 1, the Branches in the order they are checked list 2, and the Delete the fork button 3
  1. “The task moves on by itself”. The task takes the matching branch as soon as nothing holds it in the entry column. This switch belongs to the fork, not to individual branches.
  2. “Branches in the order they are checked”. Click a branch to open its panel, use the arrows to change the order.
  3. “Delete the fork”.

The panel also has “Fork label”: it replaces the field-based caption on the diamond.

If a regular link already moves tasks from the entry column by itself, the fork switch won't turn on. First turn off “The task moves on by itself” on that link.

How to move a task manually

In the move menu on a task card, the branches are grouped under the diamond's label. The matching branch says “Next: …”, the others are gray with “Does not fit: …”. You can't move a task along a branch that doesn't fit, even by dragging: Fluo replies “The branch condition is not met: …”. If no branch fits, the reason is “No branch of the fork fits”. To let the task through, correct the field the branches check.

The fork doesn't stop you from returning a task to a column where it has already been.

How to delete a fork

  1. Click “Delete the fork” in the fork panel or in the menu you get by right-clicking the diamond.
  2. The fork disappears together with all its branches. The “The fork and its branches are deleted.” notification has an Undo button.

You can delete a fork on Pro and Business. On Free and Free Team, the map is view-only.

To remove a single branch, use “Delete the link” in its panel.

On the website: Cross-team processes in Fluo: linked boards without code